BNCFS - 600 INDUSTRIAL ENAMEL 13538, B60013538

  • MSDS: BNCFS
  • Manufacturer: DAVLIN PAINT CO INC
  • Product Name: 600 INDUSTRIAL ENAMEL 13538, B60013538
  • National Stock Number: 8010-00-616-7488
Product Identification

Product ID:600 INDUSTRIAL ENAMEL 13538, B60013538
MSDS Date:02/25/1991
FSC:8010
NIIN:00-616-7488
MSDS Number: BNCFS

Responsible Party
DAVLIN PAINT CO INC
700 ALLSTON WAY
BERKELEY, CA 94702
US

Emergency Phone: 510-848-2863

Info Phone: 510-848-2863

Preparer: PATRICIA SHAW

Cage: 3Z268

Contractor
DAVLIN PAINT CO INC
2308 BERKELEY, CA 94702 US

Telephone: 510-848-2863

Cage: 3Z268

Ingredients

HYDROCARBON MIXTURE (VAPOR PRESSURE 2.0 MM HG @ 68F)

CAS: 64741-41-9

Fraction By Weight: 30%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM


SILICA, QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 0.14%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: NASAL & RESP IRRIT, NARCOSIS
(CNTRL NERV SYS DEPRESS). EYE: SEVERE IRRIT. SKIN: IRRIT, DEFAT,
DERMATITIS. INGEST: DIGEST TRACT IRRIT, CNTRL NERV SYS DEPRESS.
ASPIRATION HZD. MAT'L ENTER LUNGS ( SWALLOW/VOMIT), LUNG INFLAMM.
CHRONIC: CNTRL NERV SYS/RESP SYS, LUNG, EYE, SKIN, GI TRACT, LIVER,
SPLEEN, KIDNEY DAMAGE.
Explanation of Carcinogenicity:CRYSTALLINE SILICA IS LISTED BY IARC AS
A CARCINOGEN. ACGIH HAS ASSIGNED TLV'S TO THIS MATERIAL.
Effects of Overexposure:INHALATION: DIZZINESS, WEAKNESS, FATIGUE,
NAUSEA, AND HEADACHE. EYE: TEARING, REDNESS, AND BLURRED VISION.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMATITIS, NAUSEA.

First Aid

First Aid:EYE: FLUSH W/WATER 15 MIN, OCCASIONALLY LIFTING EYELIDS. GET
MED ATTN. SKIN: REMOVE CONTAMINATED CLOTHING, WASH W/SOAP & WATER.
IF IRRITATION PERSISTS, SEE DR. INHAL: REMOVE TO FRESH AIR. APPLY
ARTIF RESPIRATION/ADMINISTER OXYGEN IF NEEDED. CONSULT DR. INGEST:
GIVE WATER/MILK TO DRINK. PHONE FOR MED ADVICE. DON'T INDUCE VOMIT
UNLESS DIRECTED BY MED PERSONNEL. IF ADVICE UNAVAIL, TAKE TO EMERG
ROOM.

Fire Fighting

Flash Point Method:SCC
Flash Point:104F,40C
Lower Limits:1.0
Upper Limits:6.1
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE EXTINGUISHER (NFPA FLAMMABLE LIQ FIRE).
WATER MAY BE INEFFECTIVE, USE AS FOG FOR COOLING. WEAR FULL
PROTECTIVE CLOTHING & BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLOSIVE MIX W/AIR (LEL TO
UEL) WHICH CAN BE IGNITED BY MANY SOURCES. CLOSED CNTNRS MAY
EXPLODE W/HEAT. ISOLATE FROM HEAT/IGNITION SOURCES.

Accidental Release

Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE AREA. PROVIDE PROTECTIVE EQUIPMENT.
DIKE AROUND SPILL AREA. COVER SPILL WITH INERT ABSORBENT AND
TRANSFER USING NON-SPARKIN G TOOLS.

Handling

Handling and Storage Precautions:STORE BELOW 80 F IN CLOSED CONTAINER.
STORE IN ORIGINAL CONTAINER. AVOID FLAME AND HIGH TEMPERATURES. DO
NOT STORE NEAR OXIDIZING AGENTS OR ACIDS.
Other Precautions:VAPOR IS HEAVIER THAN AIR, MAY TRAVEL CONSIDERABLE
DISTANCE TO IGNITION SOURCE & FLASHBACK. DON'T INGEST OR
INHALATION. GROUND ALL CONNECTIONS, CONTAINERS, ETC WHEN POURING OR
TRANSFERING TO MINIMIZE STATIC ELECTRICITY. USE NON-SPARK TOOLS.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA EQUIPMENT WHEN AIRBORNE EXPOSURE
LIMITS ARE EXCEEDED. CONSULT RESPIRATOR MANUFACTURER TO DETERMINE
EQUIPMENT FOR GIVEN APPLICATION. HIGH AIRBORN CONCENTRATIONS MAY
REQUIRE USE OF SUPPLI ED-AIR RESPIRATOR OR SCBA.
Ventilation:PROVIDE VENTILATION TO CONTROL EXPOSURE LEVELS BELOW
AIRBORNE EXPOSURE LIMITS. VENT EQUIPMENT MUST BE EXPLOSION PROOF.
Protective Gloves:CONSULT GLOVE MFR TO DETERMINE TYPE.
Eye Protection:CHEMICAL SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:WEAR IMPERMEABLE APRONS & PROTECT CLOTHES
WHEN POSSIBLE TO PREVENT EXPOSURE OF SKIN. WEAR HEAD CAPS WHEN
POSSIBLE.
Work Hygienic Practices:AFTER USING, WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Density:> AIR
Spec Gravity:1.1 (WATER=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT WATER SOLUBLE
Appearance and Odor:PIGMENTED LIQUID. SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDE, LOW MOLECULAR WEIGHT HYDROCARBONS &
ORGANIC ACIDS.

Disposal

Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS AND WATERWAYS.
DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.